Product Details:
Size | Customised |
Brand | Ri |
Working temperature | + 260 degree celsius |
Elongation | 35%-50% |
Tensile Strength | 4,000 psi |
Operating Pressure | Up to 100,000 psi |
PTFE coating thickenss | 20 +/- 5 microns to 45 +/- 5 microns |
Corrosion Resistance | Salt Spray (ASTM B117) |
Pencil Hardness | 5H - 6H (ASTM D3363-92A) |
Kinetic Friction Coefficient | 0.06 - 0.08 |
Thickness | Nominal 0.001 (1 mil) |
Impact | 160 in lb (ASTM D2794-93) |
Adhesion | 5B (ASTM D3359-95) |
We are offering a wide range of
PTFE Coated Bolts, industrial coated bolts that provide exceptional corrosion resistance, low coefficient of friction, consistent tensioning and subsequent ease of installation and removal attributes. These fluoropolymer-coated fasteners are offered after extensive testing to ensure that these have a longer service life. Earlier, the hot dip, galvanized, cadmium or zinc plated fasteners were considered the standard but these coatings could not stand up to the corrosive atmosphere prevalent in many industries. On the other hand, low friction PTFE coating improvises the fasteners in terms of efficiency, life expectancy, and corrosion resistance. Our range of coated fasteners is widely used on B7 studs with 2H nuts. Moreover, PTFE coated connectors have out-performed all others in aggressive any noticeable effect.